Bike Wheel Spoke Protector Guard, Freewheel Spoke Protector, Plastic 4 Claws Design Transparent for Protecting the Chain Reducing the Sediment on the Flywheel

Product Information

A bike dork disc is a bike component that you may not have heard of before now. Still, almost everyone who has owned a bike has had one at one time or another. While some know what dork discs are, other bikers do not know their purpose and importance. DIY MTB Pro Tip: If your rear derailleur is properly tuned you’ll never have to test if a dork disc will keep your spokes protected. Read -> How to Adjust the Rear Derailleur What Does a Dork Disc Do? If the plastic disc is brittle, the easiest way to remove is by using a screwdriver and break the disc into pieces. As mentioned in the introduction, the work of the spoke protector is mainly to prevent the chain from reaching the spokes. Mostly, if the derailleur is not well set, it pulls the chain laterally. When the misalignment is significant, it could lead to the chain dropping.

When the ground is uneven, the chain may drop during a jump or a touchdown. Equally, if an external object hits the derailleur, it may drop the chain between the big cog and the spokes. This would be disastrous, especially if you were coasting and you didn’t have a dork disk. Again, if you are that rider who frequently take the rugged to terrains, this phenomenon may not be new to you. There are times you take sudden jumps and touchdowns, even when at high speeds. Pie plates are to keep badly adjusted derailleurs out of the spokes. Obviously, maintaining your bike and keeping the limit screws in place will prevent that from happening. One downside is the deterioration with age. Most of the spoke protectors from the late 80s onwards start as or frosted clear stiff plastic with a lot of flex.A dork disc is a plastic material that prevents the chain from hitting the spokes and damaging it. Some bikers say it is no longer essential as modern derailleurs are now better than the older models. Meanwhile, others think that this component is still necessary to prevent damage to the spokes. What Is a Bike Dork Disc?

To most cyclists who remove the dork disc from their bikes, they perceive it to be a symbol of inexperience. They associate the accessory with rookies or careless bikers. The spoke protector has to be larger than the entire cassette. As a result, its body tends to accumulate a lot of hard-to-clean mud “contaminating” the rear cogs. This is a problem primarily for mountain bikers and touring cyclists riding in hardcore conditions including mud and snow. 4. Drivetrain Jam A spoke protector is necessary because it prevents the chain from digging into the spoke in case it falls between the spokes and the big gear cog. Also, in an accident involving the rear mech, the spoke guard acts as a barrier between the chain and the spokes .Even when you have set the derailleur perfectly, other situations could make the chain drop unexpectedly. Actually, it is such eventualities that make a spoke guard valuable to a cyclist. Other than a poorly adjusted derailleur, your chain may suddenly fall due to: A Sudden Jump or Touchdown The most likely buyers of basic bicycles are beginners who don’t have the necessary knowledge and skills to maintain their machines efficiently.